L200 Data sheet
| L200 | ||
|---|---|---|
| Capacity※1 | 2 TB | 1 TB |
| Drive model number | HDWL120 | HDWL110 |
| Recording Technology※9 | SMR | SMR |
| Basic Specifications | ||
| Interface※2 | SATA 6.0 Gbit/s | SATA 6.0 Gbit/s |
| Form Factor | 2.5 inch, 9.5 mmH | 2.5 inch, 7 mmH |
| Sector size | 512e | 512e |
| Features | ||
| Drive Bays Supported※3 | Non-Public | Non-Public |
| 24 x 7 Operation (Workloads [TB/year]※4) | Non-Public | Non-Public |
| Performances | ||
| Rotation Speed [rpm] | 5400 | 5400 |
| Max Data Transfer Speed [MB/s Typ.](Sustained)※2 | Non-Public | Non-Public |
| Buffer Size [MB] | 128 | 128 |
| Reliability | ||
| MTTF [hours]※5 | 600 000 | 600 000 |
| Unrecoverable Error Rate | 1 per 1014 | 1 per 1014 |
| Load/Unload cycles | 600 000 | 600 000 |
| Power Requirements | ||
| Supply Voltage | 5 V ±5 % | 5 V ±5 % |
| Power Consumption (Spin up (+12V DC)) [A]※6 | Non-Public | Non-Public |
| Power Consumption (Operating) [W]※7 |
1.65 | 1.65 |
| Power Consumption (Active Idle) [W] | 0.85 | 0.85 |
| Dimensions | ||
| Height [mm Max.] | 9.5 Max | 9.5 Max |
| Length [mm Max.] | 100.0 Max | 100.0 Max |
| Width [mm Max.] | 69.85 Max | 69.85 Max |
| Weight [g Max.] | 117 Max | 92 Max |
| Bottom holes type※8 | Non-Public | Non-Public |
| Environmental Requirements | ||
| Temperature ( Operating ) [℃] | 0 to 65 (surface) | 0 to 65 (surface) |
| Temperature ( Non-operating ) [℃] | -40 to 65 | -40 to 65 |
| Vibration (Operating) [m/s2] | 9.8 {1.0 G} (5 to 500 Hz) |
9.8 {1.0 G} (5 to 500 Hz) |
| Vibration (Non-operating) [m/s2] | 49 {5.0 G} (15 to 500 Hz) |
49 {5.0 G} (15 to 500 Hz) |
| Shock (Operating) [m/s2] | 3920 {400 G} (2 ms half sine) |
3920 {400 G} (2 ms half sine) |
| Shock (Non-operating) [m/s2] | 9800 {1000 G} (2 ms half sine) |
9800 {1000 G} (2 ms half sine) |
| Acoustics (Sound Power) Idle mode [dB] |
23 | 19 |
- ※1One Gigabyte (GB) means one billion bytes and one Terabyte (TB) means one trillion bytes.
Total available capacity will vary based on operating environment, and your results and storage capacity will vary accordingly.
A computer operating system, however, reports storage capacity using powers of 2 for the definition of 1 TB = 240 = 1 099 511 627 776 bytes and therefore shows less storage capacity. - ※2Read and write speed may vary depending on the host device, read and write conditions, and file size.
- ※3As for "Drive Bays Supported", please contact your Solutions Provider because the compatibility with the host device will vary based on the system.
- ※4Workload is defined as the amount of data written, read or verified by commands from host system.
- ※5MTTF (Mean Time to Failure) is not a guarantee or estimate of product life; it is a statistical value related to mean failure rates for a large number of products which may not accurately reflect actual operation. Actual operating life of the product may be different from the MTTF.
- ※6Not including glitch less than 100 μs.
- ※7Operating watt is measured using 80 % random read/write and 20 % performance idle.
- ※8Location of bottom mounting hole is different from product. For more information, please see the following page.
https://toshiba.semicon-storage.com/us/design-support/faq/storage-holes.html - ※9SMR means Shingled Magnetic Recording. CMR means Conventional Magnetic Recording.